ZEROWATER 12 CUP / 2.8L JUG
64.00
Tax included
ZeroWater’s 12-cup water filter jug is the first in its class to benefit from a sealed lid and reservoir which allows filtered water to be poured while water which hasn’t yet been filtered remains in the reservoir. This adds a further 2 cups of capacity to the 10 cups of filtered water in the jug. It also features a one-handed, pull and pour button spout for easy pouring from the fridge or for filling bottles.
Unlike other leading water filter jugs, ZeroWater benefits from a patented, 5-stage Ion Exchange Filtration system which removes virtually all dissolved solids from your water. This provides great tasting water without the dissolved solids which may include Minerals, Salts, Metals, Chemicals and Runoff.
Moreover, it reduces 99% of all Fluoride and other inorganics, such as Nitrates, from your water.
Four additional stages of water filtration ensure larger particles and other contaminants are removed, ensuring the filter delivers a “000” reading on the included laboratory-grade water quality meter.
NOTE: In the factory, the filters are rinsed with purified water before being packaged in order to wash away the free carbon particles that are produced during the manufacturing process, as one of the filter layers is a carbon filter. It is normal to find some water when you open a new filter bag.
Dimensions (L x W x H): 29.5 x 15 x 28 cm
ZeroWater’s 12-cup water filter jug is the first in its class to benefit from a sealed lid and reservoir which allows filtered water to be poured while water which hasn’t yet been filtered remains in the reservoir. This adds a further 2 cups of capacity to the 10 cups of filtered water in the jug. It also features a one-handed, pull and pour button spout for easy pouring from the fridge or for filling bottles.
Unlike other leading water filter jugs, ZeroWater benefits from a patented, 5-stage Ion Exchange Filtration system which removes virtually all dissolved solids from your water. This provides great tasting water without the dissolved solids which may include Minerals, Salts, Metals, Chemicals and Runoff.
Moreover, it reduces 99% of all Fluoride and other inorganics, such as Nitrates, from your water.
Four additional stages of water filtration ensure larger particles and other contaminants are removed, ensuring the filter delivers a “000” reading on the included laboratory-grade water quality meter.
NOTE: In the factory, the filters are rinsed with purified water before being packaged in order to wash away the free carbon particles that are produced during the manufacturing process, as one of the filter layers is a carbon filter. It is normal to find some water when you open a new filter bag.
Dimensions (L x W x H): 29.5 x 15 x 28 cm
ZeroWater’s Premium 5-Stage Filtration
Removes 99.6% of Dissolved Solids,
including Lead.
Ready-Pour® Technology
allows you to dispense filtered water
as the reservoir continues to filter.
Includes a Free Water Quality Meter
that measures total dissolved solids to
that measures total dissolved solids to
ensure you are drinking the purest tasting water.
“Quick Fill” Spigot
Comfort-Grip Handle
2.8L Capacity
WHAT YOU GET:
12-Cup Ready-Pour™ pitcher
Zerowater Ion Exchange water filter
TDS Water Quality Meter (20€ value)
ZEROWATER READY-POUR™ FEATURES:
12 cup capacity = 10 cup pitcher + 2 cups in reserve
Immediate pouring ability
One-hand "push to dispense" spout to fill any bottle or cup
Convenient space-saving design
ZEROWATER READY-POUR™ BENEFITS:
NSF Certified to REDUCE LEAD
Removes 99.6% of all dissolved solids
Reduces 99% of all Fluoride
Purest tasting drinking water
All ZeroWater products are completely BPA free
It is the only water filter jug certified for filtering lead and chromium
Always supplied with a free filter and TDS meter
You can immediately enjoy delicious pure water
More information about this product
The 2.8-litre water jug will be filled with pure water within a few minutes.
The dimensions of the jug are 29.5 x 15.1 x 28 cm. The capacity is sufficient for a family of four.
Especially handy is that it is possible to pour water with this water jug with tap while the filter is still filtering.
It is also possible to leave the jug on the kitchen top and to use the tap on the back to easily tap a glass of filtered water without having to lift the jug. *Increased levels of TDS (total dissolved solids) may affect taste and appearance of your water. ZeroWater Technology is the only water filtration system to remove 99.6% of TDS, equivalent to TDS in purified bottled water.
WHAT IS TDS?
TOTAL DISSOLVED SOLIDSDissolved Solids are a measurement of compounds like minerals, salts and organic compounds that are dissolved into water through contact with rock and other surfaces. TDS can be made up of several different types of compounds (including but not limited to): calcium, magnesium, iron, sodium chloride and sulfides (which are compounds frequently found in groundwater supplies).
Total Dissolved Solids (TDS) refer to minerals, salts, metals including lead, chemicals, fluoride and runoff polluting your drinking water.
ZeroWater's first layer of filtration, activated carbon and oxidation reduction alloy removes the chlorine taste you are accustom to with tap water.The Ion Exchange stage removes virtually all dissolved solids that may be left over from public water systems or even leached into your water from piping such as Aluminum, Lead, Zinc, Nitrate and more.Three additional stages are included to remove other contaminants and to ensure your water receives the appropriate amount of treatment time to deliver a "000" reading on your laboratory-grade Total Dissolved Solids meter included. Stage 1: Coarse filter to remove fine particles/sediment. Stage 2: Distributor that maximizes contact time. Stage 3: Multi-layer system using activated carbon and oxidation reduction alloy.Stage 4: Comprehensive ION EXCHANGE array.Stage 5: Non-woven membrane to remove fine particles.The contaminants or other substances removed or reduced by this water treatment device are not necessarily in all users' water.AND WHEN SHOULD YOU REPLACE THE FILTER?Unfortunately it is not possible to give an exact lifespan for the filter.This is because the amount of contamination is different per water tap.In order to know when you should replace the filter, you receive a free TDS meter with each jug.You put this in the water every week to test whether it is time to replace the filter.Would you like to know more about the TDS meter or how you assemble the water jug?PELASE NOTE!Do not use with water that is microbiological unsafe or of unknown quality without adequate disinfection.Unless stated otherwise, municipal water is drinkable. Filtered potable tap water tested by an independent lab (not the FDA) to meet specifically the water quality requirements for using the label purified.Compared to water produced by leading gravity fed filters.AMOUNT OF WATER CAN BE CLEANEDThe water inspection device (TDS meter) is calibrated and ready for use.The TDS meter shows the number of dissolved particulates in water in parts per million(1 ppm = 1 milligram of dissolved solids per liter of water).When dissolved particulates in water are present (according to TDS evidence):from 002 to 050 ppm (low polluted water) – clears ~ 150 litersfrom 051 to 200 ppm (the most common contamination) – clears from 95 to 150 litersfrom 201 to 300 ppm (a lot of particulate matter) – clearsfrom 55 to 9 5 litersfrom 301 to 400 ppm (particle very much) – clears from 30 to 55 litersabove 401 ppm (particle extremely high) – clears 30 liters or less
Below are the performance results of ZeroWater’s 5-stage filter vs. a conventional filter for inorganic chemicals as listed under the EPA’s national primary drinking water regulations and contaminants listed under the EPA’s secondary drinking water standards. Results shown are based on a 150 litre filtration, double the rated usage to ensure consumer safety. The compounds tested are compounds listed by EPA as Primary and Secondary drinking water contaminants. The compounds tested are also listed by the NSF/ANSI Standard 53 and Standard 42 with established procedures for filter manufactures reduction claims. The procedure used in this comparison study were based on the NSF/ANSI standards 42 and 53, 2018 editions. The methods of analysis used in this study are EPA approved methods for drinking water.
How are the zerowater filters tested?
Test results as performed by 3rd party laboratory is based on NSF/ANSI testing protocol of pour through devices for contaminants listed under the National Primary Drinking Water Standards.Contaminants were tested at the average Influent Challenge Concentration levels as established under testing protocols by contaminant type. Results shown are based on a 150 litre filtration, double the rated usage to ensure consumer safety.These results are calculated from an average of two pH's (6.5pH and 8.5pH) * Indicates NSF Certified Contaminant reduction percentages for ZeroWater. These results are calculated from an average of two pH's (6.5pH and 8.5pH) Testing performed Quality Filter Testing Laboratory, LLC located in Wilmington, DE. Quality Filter Testing Laboratory, LLC is an independent ISO 17025 laboratory certified by WQA and IAPMO to test water filters as per NSF/ANSI Std 42, 53, 58, 401, 473, P231.Test results based on NSF/ANSI testing standards of pour through devices as performed by Quality Filter Testing Laboratory, LLC, located in Williamstown, New Jersey, an independent ISO 17025 laboratory recognized by IAPMO.ZeroWater’s 5-stage filter with a rated capacity of 75 litres and Brita’s 2-Stage Standard Filter with a rated capacity of 150 litres were tested in accordance with the products’ recommended daily usage of 7.5 litres of filtration per day. Results shown are based on an averaged calculation of each filter’s test results of drinking water at a pH level of 6.5 and pH level of 8.5.
Brita® is a registered trademark of Brita®, L.P, which is not affiliated with Zero Technologies, LLC.
Challenge Water Preparation:
The Metals challenge water was prepared by adding the appropriate amount of reagent standard to 20 Litres of water to get a concentration stated by the NSF/ANSI standard 42 or 53 for each metals, except for those metals that are not included in the NSF/ANSI standard, these metals were prepared 10 times the concentration of the EPA drinking water limit for that particular metal. The challenge water was passed through each filter, side by side, at a rate of 1 litre, 45 minutes load/45 minutes rest, and a filtered water sample was taken from each filter after 20 litres and tested for each metal using the EPA method 200.8 except for Iron that was tested using SM 3111-B. Adjusted the pH to 6.5 and 8.5 for all contaminants and the average of the two results was reported for each metal.The Inorganic-Non-Metals- Parameters challenge water was prepared by adding the appropriate amount of reagent standard to 20 Litres of water to get a concentration stated by the NSF/ANSI standard 42 or 53 for each parameter, except for those parameters that are not included in the NSF/ANSI standard, these parameters were prepared 10 times the concentration of the EPA drinking water limit for that particular parameter. The challenge water was passed through each filter, side by side, at a rate of 1 litre, 45 minutes load/45 minutes rest, a filtered water sample was taken from each filter after 20 litres and tested for each parameter along with the challenge water using the respective EPA method, or Standard Method for the Examination of Water.
Summary:
ZD-012RP
10 Items